PRODUCTS FINDER

+
Antennas
- -
  GPS/Glonass/Compass Antenna
  -
  GSM/CDMA/3G/LTE Antenna
  -
  WIFI/WLAN Antenna
  -
  4G Antenna
  -
  433/868/915MHz Antenna
  -
  GPS-GLONASS Antenna
  -
  Dielectric Antenna
  -
  RF Cable Assemblies
+
Buzzers
- -
  Piezo Buzzers
  -
  Piezo Transducer Buzzers
  -
  Magnetic Transducer Buzzers
  -
  Mechanical Buzzers
  -
  SMD Magnetic Buzzers
  -
  SMD Piezo Buzzers
  -
  Piezo Diaphragms
  -
  Mini Microphone
  -
  Speaker
+
Connectors
- -
  Wire to board connectors & Wire to wire connectors
  -
  Male pin header connetors & Mini jumper connectors
  -
  Female header connectors
  -
  Box header connectors & Ejector header connectors
  -
  Micro match connectors
  -
  IDC connectors
  -
  FFC/FPC connectors
  -
  IC socket & PLCC socket & ZIF socket connectors
  -
  D-Sub connectors & D-SUB hood
  -
  SIM card connectors & Micro SIM card connectors & Nano SIM Card Connectors
  -
  Memory card connectors
  -
  EDGE card connectors & CF card connectors
  -
  Smart card connectors
  -
  USB 3.1 type C connectors
  -
  USB 3.0 connectors
  -
  USB 2.0 connectors
  -
  IEEE 1394 connectors
  -
  AC power socket connectors*AC power plug connectors
  -
  Anderson Connector
  -
  Mini USB connectors
  -
  Micro USB connectors
  -
  SATA connectors
  -
  DVI connectors & HDMI connectors
  -
  Pogo pin connectors
  -
  SCSI connectors & Centronic connectors
  -
  High current D-SUB connectors
  -
  DIN41612 connectors
+
Encoder And Potentiometers
- -
  Cermet Potentiometers
  -
  Trimmer Potentiometers
  -
  Wire-Wound Potentiometers
  -
  Rotary Potentiometers
+
Battery Holders
- -
  18650 Battery Holder
  -
  Coin Cell Holders
  -
  AA & UM-3 Battery Holder
  -
  AAA&UM-4 Battery Holders
  -
  Battery Connectors
+
Fuses And Fuse Holders
- -
  3.6*10mm Fuses
  -
  4*15mm Fuses
  -
  5.2*20mm Fuses
  -
  6.3*25mm /6.3*30mm / 6.3*32mm Fuses
  -
  Fuse Clips
  -
  Panel Type Fuse Holders
  -
  PCB Type Fuse Holders
  -
  Fuse Hloder With Cable
  -
  PTC Resettable Fuses
  -
  Thermal fuses
  -
  Auto Fuses And Auto Fuse Holders
  -
  SMD PTC Resettable Fuses
  -
  Overload Switches
  -
  TVS Diode
  -
  SMD Fuses
+
Flat Cables And Cable Assemblies
- -
  FFC/FPC cables
  -
  Flat cables
  -
  Rainbow ribbon cables
  -
  IDC cable assemblies
  -
  USB cables
  -
  Power cords
  -
  Wire harness
  -
  LAN cables* Fibre-optic Patch Cables
  -
  Phone cords
  -
  SATA cables
  -
  D-SUB cables * VGA cables
  -
  Audio/Video adaptor cables
  -
  SCSI cables
  -
  XLR audio cables
  -
  RCA audio cables
  -
  Mono/Stereo audio cables
  -
  HDMI cables * DVI cables
  -
  DC cables
  -
  S-Video cables
+
Fans
- -
  DC fans
  -
  AC fans
  -
  DC blowers
  -
  LED fans
  -
  DC cross flow fan
  -
  Fan accessories
+
Inductors And Transformer
- -
  Power Relay
  -
  SMD chip inductors
  -
  Axial conformal coated inductors
  -
  Power chokes inductors
  -
  SMD inductors
  -
  High current filter chokes inductors
  -
  Toroidal common mode chokes
  -
  High frequency transformers
  -
  Nanocrystalline magnetic cores
  -
  Adjustable inductors
  -
  Common mode chokes
  -
  Beads
  -
  SMD molded wound chip inductor
  -
  Industrial Relay
  -
  High Power Metering Relay
  -
  Automotive Relay
  -
  Signal Relay
  -
  HVDC Relay
  -
  High-Frequency Relay
  -
  Relay Socket
+
Quartz Crystal Units And Ceramic Resonators
- -
  32.768KHz Crystal Units
  -
  Crystal resonators
  -
  Quartz crystal filter
  -
  Ceramic resonators
  -
  Ceramic filter
  -
  Ceramic discriminators
+
Switches
- -
  Rocker switches
  -
  Tactile switches
  -
  Slide switches
  -
  Push button switches
  -
  Toggle switches
  -
  Push switches
  -
  DIP switches
  -
  Rotary switches*Coding switches
  -
  Switch caps
  -
  Automotive switch
  -
  Detector switches
  -
  LED push button switches
  -
  Micro switches
  -
  Hook switches
  -
  Multi-Function switches
+
Audio Connectors
- -
  2.5mm phone jack audio connectors
  -
  2.5mm3.5mm6.3mm phone plug audio connectors
  -
  3.5mm phone jack audio connectors
  -
  6.3mm phone jack audio connectors
  -
  Audio fiber Optical Jack
  -
  Audio*Video adaptor connectors
  -
  Banana plug connectorsBanana jack connectors
  -
  Binding post connectors
  -
  DC power PLUG
  -
  DIP DC power connectors
  -
  LARGE CURRENT DC JACK
  -
  Loudspeaker connectors
  -
  Loudspeaker terminals
  -
  Mini din connectors*Din connectors
  -
  Power Din Jack & Plug
  -
  RCA jack connectors
  -
  RCA plug connectors
  -
  Security Camera DC Power Connectors & Adapters
  -
  SMT DC power connectors
  -
  XLR connectors
+
RF Connectors
- -
  SMA Connectors
  -
  SMB Connectors
  -
  MCX Connectors
  -
  MMCX Connectors
  -
  U.FL*UMCC*I-PEX connectors
  -
  Fakra connectors
  -
  F connectors
  -
  BNC connectors
  -
  TNC connectors
  -
  N Connectors
  -
  1.0/2.3 Connectors
  -
  1.6/5.6 Connectors
  -
  7/16 (L29) DIN connectors
  -
  Mini UHF connectors
  -
  UHF connectors
  -
  FME connectors
+
Ethernet Connectors
- -
  Modular Jacks
  -
  SMT Modular Jacks
  -
  LSA-PLUS Modules
  -
  Wired Telephone Jacks
  -
  ADSL Modular Adapter *Telephone Jack Adapter
  -
  CAT3 Keystone Jacks
  -
  IDC Wire Connectors
  -
  CAT5E/CAT6/CAT6A Keystone Jacks
  -
  Ethernet Magnetic Transformers
  -
  SFP/XFP/QSFP Connectors
  -
  Modular Plugs
  -
  Modular Jack With Transformer
  -
  Krone IDC Block PCB-PLUS
+
Terminal Blocks
- -
  Reflow Solder LCP Housing Terminal Blocks
  -
  PCB Terminal Block Rising clamp
  -
  Non-Insulated Terminals
  -
  Insulated Terminals
  -
  Wago MCS Connectors
  -
  Miniature Rail-Mounted Terminal Blocks
  -
  Feed Through Terminal Blocks And Box
  -
  Barrier Terminal Blocks
  -
  Screwless-Spring Terminal Blocks
  -
  Pluggable Terminal Blocks
  -
  PCB Terminal Block Wire Protector
  -
  Solder Terminals For PCB Mount
+
Circular Connectors
- -
  W13&W17&W21 IP68 waterproof circular connectors
  -
  RJ45 waterproof circular connectors
  -
  USB waterproof circular connectors
  -
  IP65 waterproof loudspeaker connectors
  -
  RD24 IP67 waterproof circular connectors
  -
  D-SUB waterproof connectors
  -
  M20 Waterproof Connectors
  -
  Circular Connectors
  -
  M12 IP67 Waterproof Connectors
  -
  Quick Lock B Series IP67 Waterproof Connectors
  -
  C091 & 581 series Miniature Circular Connectors
  -
  EV charging connectors
+
Tools
- -
  US POWER STRIP
  -
  AUTO CIG PLUG
  -
  Heat shrinkable tubing
  -
  PVC insulation tape
  -
  Solderless breadboard
  -
  Solderless Jumper Wires
  -
  Solder Tools
  -
  HEAT GUN
  -
  CRIMP TOOLS
+
LED Lighting Connectors
- -
  Wago LED light connectors
  -
  LED terminal blocks
  -
  Wago terminal blocks
  -
  Waterproof junction box
  -
  Waterproof breathable valve
  -
  LED lighting waterproof connectors & Cables
  -
  Pluggable connectors
  -
  Fuse terminal blocks
  -
  Lamp switch connectors
  -
  Lamp holders
+
Optoelectronics
- -
  Single LED numeric display
  -
  Led spacer support
+
Wiring Accessories

Pogo pin connectors

Pogo Pin Connectors, precision connectors, electrical connectors, spring-loaded connectors, PCB connectors, reliable pogo pins, high-performance connectors, durable pogo pins, electrical contact solutions, customizable pogo pins, surface mount pogo pins, through-hole pogo pins, low-profile pogo pins, connector technology, innovative pogo pin design, versatile electrical connections, contact pins for testing, pogo pins for electronics, high-speed data transfer, secure electrical contacts, miniature connectors, cost-effective pogo pin solutions.

Enlarge

Quick View

Pogo pin connectors : RE-C-12PGC01

Series Part No:RE-C-12PGC01

RoHS Compliance:Yes

Download Datasheet:

Write Your Request Full P/N :

QTY:

Remark: Considering the difference between test spot and actual work spot, the impedance test condition defined by Top-Link is based on the whole working stroke. This is what we generally said dynamic impedance testing, it differs from the static test condition of ELA-364923, the durability test standard is also based on this test condition.
    -----------------------------------------------------------------------------------------------------------------------------------------------------------
    RE-C is equipped with comprehensive inspection and reliability testing equipment.
    RE-C attaches great importance to quality management of each link, including IQC, IPQC, 100% dynamic testing of spring force and contact impedance , 100% appearance inspection, FQC sampling inspection, CQC, design verification, regular reliability testing, failure analysis, and so on.
    RE-C has implemented strict and effective quality control over each link which includes product design, sample preparation, trial production and mass production. As a consequence, our product quality is guaranteed.
    ==========================================================================================
    pogo pin connector OEM type
    1, small diameter, fine type products
       The minimum can be done is below 0.75
    2, high durability
       Maximum durability of up to 1 million times
    3, large current
       Maximum up to 15A current
    4, high reliability
       100% dynamic impedance testing to ensure 100% functional zero defects
    5, lower operating height
        Minimum working height of up to 1.5mm, the chopping block can be lower
    6, high precision (size & forward force)
        Height tolerances up to +, - 0.05mm positive up to + / - 10%
    7, non-standard structure
       Customer requirements can be customized according to customer requirements, such as: mushroom head structure

X

X
Enlarge

Quick View

Pogo pin connectors : RE-C-12PGC01B

Series Part No:RE-C-12PGC01B

RoHS Compliance:Yes

Download Datasheet:

Write Your Request Full P/N :

QTY:

Remark: Considering the difference between test spot and actual work spot, the impedance test condition defined by Top-Link is based on the whole working stroke. This is what we generally said dynamic impedance testing, it differs from the static test condition of ELA-364923, the durability test standard is also based on this test condition.
    -----------------------------------------------------------------------------------------------------------------------------------------------------------
    RE-C is equipped with comprehensive inspection and reliability testing equipment.
    RE-C attaches great importance to quality management of each link, including IQC, IPQC, 100% dynamic testing of spring force and contact impedance , 100% appearance inspection, FQC sampling inspection, CQC, design verification, regular reliability testing, failure analysis, and so on.
    RE-C has implemented strict and effective quality control over each link which includes product design, sample preparation, trial production and mass production. As a consequence, our product quality is guaranteed.
    ==========================================================================================
    pogo pin connector OEM type
    1, small diameter, fine type products
       The minimum can be done is below 0.75
    2, high durability
       Maximum durability of up to 1 million times
    3, large current
       Maximum up to 15A current
    4, high reliability
       100% dynamic impedance testing to ensure 100% functional zero defects
    5, lower operating height
        Minimum working height of up to 1.5mm, the chopping block can be lower
    6, high precision (size & forward force)
        Height tolerances up to +, - 0.05mm positive up to + / - 10%
    7, non-standard structure
       Customer requirements can be customized according to customer requirements, such as: mushroom head structure

X

X
Enlarge

Quick View

Pogo pin connectors : RE-C-2PGC02

Series Part No:RE-C-2PGC02

RoHS Compliance:Yes

Download Datasheet:

Write Your Request Full P/N :

QTY:

Remark: Considering the difference between test spot and actual work spot, the impedance test condition defined by Top-Link is based on the whole working stroke. This is what we generally said dynamic impedance testing, it differs from the static test condition of ELA-364923, the durability test standard is also based on this test condition.
    -----------------------------------------------------------------------------------------------------------------------------------------------------------
    RE-C is equipped with comprehensive inspection and reliability testing equipment.
    RE-C attaches great importance to quality management of each link, including IQC, IPQC, 100% dynamic testing of spring force and contact impedance , 100% appearance inspection, FQC sampling inspection, CQC, design verification, regular reliability testing, failure analysis, and so on.
    RE-C has implemented strict and effective quality control over each link which includes product design, sample preparation, trial production and mass production. As a consequence, our product quality is guaranteed.
    ==========================================================================================
    pogo pin connector OEM type
    1, small diameter, fine type products
       The minimum can be done is below 0.75
    2, high durability
       Maximum durability of up to 1 million times
    3, large current
       Maximum up to 15A current
    4, high reliability
       100% dynamic impedance testing to ensure 100% functional zero defects
    5, lower operating height
        Minimum working height of up to 1.5mm, the chopping block can be lower
    6, high precision (size & forward force)
        Height tolerances up to +, - 0.05mm positive up to + / - 10%
    7, non-standard structure
       Customer requirements can be customized according to customer requirements, such as: mushroom head structure

X

X
Enlarge

Quick View

Pogo pin connectors : RE-C-3PGC02

Series Part No:RE-C-3PGC02

RoHS Compliance:Yes

Download Datasheet:

Write Your Request Full P/N :

QTY:

Remark: Considering the difference between test spot and actual work spot, the impedance test condition defined by Top-Link is based on the whole working stroke. This is what we generally said dynamic impedance testing, it differs from the static test condition of ELA-364923, the durability test standard is also based on this test condition.
    -----------------------------------------------------------------------------------------------------------------------------------------------------------
    RE-C is equipped with comprehensive inspection and reliability testing equipment.
    RE-C attaches great importance to quality management of each link, including IQC, IPQC, 100% dynamic testing of spring force and contact impedance , 100% appearance inspection, FQC sampling inspection, CQC, design verification, regular reliability testing, failure analysis, and so on.
    RE-C has implemented strict and effective quality control over each link which includes product design, sample preparation, trial production and mass production. As a consequence, our product quality is guaranteed.
    ==========================================================================================
    pogo pin connector OEM type
    1, small diameter, fine type products
       The minimum can be done is below 0.75
    2, high durability
       Maximum durability of up to 1 million times
    3, large current
       Maximum up to 15A current
    4, high reliability
       100% dynamic impedance testing to ensure 100% functional zero defects
    5, lower operating height
        Minimum working height of up to 1.5mm, the chopping block can be lower
    6, high precision (size & forward force)
        Height tolerances up to +, - 0.05mm positive up to + / - 10%
    7, non-standard structure
       Customer requirements can be customized according to customer requirements, such as: mushroom head structure

X

X
Enlarge

Quick View

Pogo pin connectors : RE-C-4PGC02

Series Part No:RE-C-4PGC02

RoHS Compliance:Yes

Download Datasheet:

Write Your Request Full P/N :

QTY:

Remark: Considering the difference between test spot and actual work spot, the impedance test condition defined by Top-Link is based on the whole working stroke. This is what we generally said dynamic impedance testing, it differs from the static test condition of ELA-364923, the durability test standard is also based on this test condition.
    -----------------------------------------------------------------------------------------------------------------------------------------------------------
    RE-C is equipped with comprehensive inspection and reliability testing equipment.
    RE-C attaches great importance to quality management of each link, including IQC, IPQC, 100% dynamic testing of spring force and contact impedance , 100% appearance inspection, FQC sampling inspection, CQC, design verification, regular reliability testing, failure analysis, and so on.
    RE-C has implemented strict and effective quality control over each link which includes product design, sample preparation, trial production and mass production. As a consequence, our product quality is guaranteed.
    ==========================================================================================
    pogo pin connector OEM type
    1, small diameter, fine type products
       The minimum can be done is below 0.75
    2, high durability
       Maximum durability of up to 1 million times
    3, large current
       Maximum up to 15A current
    4, high reliability
       100% dynamic impedance testing to ensure 100% functional zero defects
    5, lower operating height
        Minimum working height of up to 1.5mm, the chopping block can be lower
    6, high precision (size & forward force)
        Height tolerances up to +, - 0.05mm positive up to + / - 10%
    7, non-standard structure
       Customer requirements can be customized according to customer requirements, such as: mushroom head structure

X

X
Enlarge

Quick View

Pogo pin connectors : RE-C-5PGC02

Series Part No:RE-C-5PGC02

RoHS Compliance:Yes

Download Datasheet:

Write Your Request Full P/N :

QTY:

Remark: Considering the difference between test spot and actual work spot, the impedance test condition defined by Top-Link is based on the whole working stroke. This is what we generally said dynamic impedance testing, it differs from the static test condition of ELA-364923, the durability test standard is also based on this test condition.
    -----------------------------------------------------------------------------------------------------------------------------------------------------------
    RE-C is equipped with comprehensive inspection and reliability testing equipment.
    RE-C attaches great importance to quality management of each link, including IQC, IPQC, 100% dynamic testing of spring force and contact impedance , 100% appearance inspection, FQC sampling inspection, CQC, design verification, regular reliability testing, failure analysis, and so on.
    RE-C has implemented strict and effective quality control over each link which includes product design, sample preparation, trial production and mass production. As a consequence, our product quality is guaranteed.
    ==========================================================================================
    pogo pin connector OEM type
    1, small diameter, fine type products
       The minimum can be done is below 0.75
    2, high durability
       Maximum durability of up to 1 million times
    3, large current
       Maximum up to 15A current
    4, high reliability
       100% dynamic impedance testing to ensure 100% functional zero defects
    5, lower operating height
        Minimum working height of up to 1.5mm, the chopping block can be lower
    6, high precision (size & forward force)
        Height tolerances up to +, - 0.05mm positive up to + / - 10%
    7, non-standard structure
       Customer requirements can be customized according to customer requirements, such as: mushroom head structure

X

X
Enlarge

Quick View

Pogo pin connectors : RE-C-6PGC02

Series Part No:RE-C-6PGC02

RoHS Compliance:Yes

Download Datasheet:

Write Your Request Full P/N :

QTY:

Remark: Considering the difference between test spot and actual work spot, the impedance test condition defined by Top-Link is based on the whole working stroke. This is what we generally said dynamic impedance testing, it differs from the static test condition of ELA-364923, the durability test standard is also based on this test condition.
    -----------------------------------------------------------------------------------------------------------------------------------------------------------
    RE-C is equipped with comprehensive inspection and reliability testing equipment.
    RE-C attaches great importance to quality management of each link, including IQC, IPQC, 100% dynamic testing of spring force and contact impedance , 100% appearance inspection, FQC sampling inspection, CQC, design verification, regular reliability testing, failure analysis, and so on.
    RE-C has implemented strict and effective quality control over each link which includes product design, sample preparation, trial production and mass production. As a consequence, our product quality is guaranteed.
    ==========================================================================================
    pogo pin connector OEM typ
    1, small diameter, fine type products
       The minimum can be done is below 0.75
    2, high durability
       Maximum durability of up to 1 million times
    3, large current
       Maximum up to 15A current
    4, high reliability
       100% dynamic impedance testing to ensure 100% functional zero defects
    5, lower operating height
        Minimum working height of up to 1.5mm, the chopping block can be lower
    6, high precision (size & forward force)
        Height tolerances up to +, - 0.05mm positive up to + / - 10%
    7, non-standard structure
       Customer requirements can be customized according to customer requirements, such as: mushroom head structure

X

X
Enlarge

Quick View

Pogo pin connectors : RE-C-7PGC02

Series Part No:RE-C-7PGC02

RoHS Compliance:Yes

Download Datasheet:

Write Your Request Full P/N :

QTY:

Remark: Considering the difference between test spot and actual work spot, the impedance test condition defined by Top-Link is based on the whole working stroke. This is what we generally said dynamic impedance testing, it differs from the static test condition of ELA-364923, the durability test standard is also based on this test condition.
    -----------------------------------------------------------------------------------------------------------------------------------------------------------
    RE-C is equipped with comprehensive inspection and reliability testing equipment.
    RE-C attaches great importance to quality management of each link, including IQC, IPQC, 100% dynamic testing of spring force and contact impedance , 100% appearance inspection, FQC sampling inspection, CQC, design verification, regular reliability testing, failure analysis, and so on.
    RE-C has implemented strict and effective quality control over each link which includes product design, sample preparation, trial production and mass production. As a consequence, our product quality is guaranteed.
    ==========================================================================================
    pogo pin connector OEM type
    1, small diameter, fine type products
       The minimum can be done is below 0.75
    2, high durability
       Maximum durability of up to 1 million times
    3, large current
       Maximum up to 15A current
    4, high reliability
       100% dynamic impedance testing to ensure 100% functional zero defects
    5, lower operating height
        Minimum working height of up to 1.5mm, the chopping block can be lower
    6, high precision (size & forward force)
        Height tolerances up to +, - 0.05mm positive up to + / - 10%
    7, non-standard structure
       Customer requirements can be customized according to customer requirements, such as: mushroom head structure

X

X

Previous page 1 2 3